Welcome to Zhejiang XuRuiL Electronic Co.,Ltd.

E-mail:export@chinaxurui.com



Your location：

Homepage

Blog

lndustry News

Installation method of china Solid state relay purchase

Author:
Origin:
Time of issue:2022-07-11 08:40
Views:

(Summary description)Horizontal W-type, vertical L-type, small size, suitable for direct welding and installation of printed boards. Vertical L2 type, suitable for both circuit board soldering installation and circuit board plug-in installation.

china Solid state relay purchase

Horizontal W-type, vertical L-type, small size, suitable for direct welding and installation of printed boards. Vertical L2 type, suitable for both circuit board soldering installation and circuit board plug-in installation.





Installation method of china Solid state relay purchase

Categories:lndustry News
Author:
Origin:
Time of issue:2022-07-11 08:40
Views:0

Information

Do you know the installation method of china Solid state relay purchase? Let’s take a look at it briefly below!
Horizontal W-type, vertical L-type, small size, suitable for direct welding and installation of printed boards. Vertical L2 type, suitable for both circuit board soldering installation and circuit board plug-in installation. When selecting a solid state relay for a printed circuit board with a small current specification, since the lead terminals are made of high thermal conductivity materials, the welding should be carried out under the condition that the temperature is less than 250°C and the time is less than 10S. If the ambient temperature is considered, if necessary Derating can be considered, and the load current is generally controlled within 1/2 of the rated value.

china Solid state relay purchase
K type and F type, suitable for radiator and instrument bottom plate installation. When installing high-power SSR (K-type and F-type packages), it should be noted that the contact surface of the heat sink should be flat, and thermal grease (MEBO T-50) should be applied. The larger the installation torque, the smaller the contact thermal resistance. For large current lead wires, cold-pressed solder tabs are required to reduce the contact resistance of the lead wires.
The above is a brief introduction to the relevant knowledge about the installation method of china Solid state relay purchase.